Our stainless steel solid bottom cable tray has a continuous, unperforated base and two solid side rails, made from stainless steel that resists corrosion through its own composition. There is no zinc or paint coating to wear off, so cut edges, corners, and welds stay protected. The solid base supports cables along their full length and keeps dust, debris, and splashes out, and the smooth surface is easy to clean. It is a dependable choice for control, instrumentation, and data cables in coastal, chemical, food, and other demanding environments.
Or email admin@wananelectric.com, or call or WhatsApp +86 18823394830.
Key Features
- Corrosion resistance through the material: no coating to chip or wear, so edges and corners stay protected
- Two grades: SS304 for general corrosion resistance, and SS316 where chlorides, salt spray, or harsher chemicals are present
- Hygienic and easy to clean: a smooth surface and solid base suit food, beverage, pharmaceutical, and wash-down areas
- Full cable support: the continuous base carries small and soft cables along their entire length
- Better protection: solid sides and base keep dust, debris, and small objects out, and an optional stainless cover closes the run
- Complete system: matching bends, tees, reducers, covers, supports, and stainless steel hardware can be supplied
Specifications
| Model | Width (mm) | Height (mm) | Thickness (mm) | Length (mm) |
|---|---|---|---|---|
| WA-CT-5050-1 | 50 | 50 | 1 | 2000 |
| WA-CT-10050-1 | 100 | 50 | 1 | 2000 |
| WA-CT-100100-1 | 100 | 100 | 1 | 2000 |
| WA-CT-150100-1 | 150 | 100 | 1 | 2000 |
| WA-CT-200100-1.2 | 200 | 100 | 1.2 | 2000 |
| WA-CT-200150-1.2 | 200 | 150 | 1.2 | 2000 |
| WA-CT-300100-1.2 | 300 | 100 | 1.2 | 2000 |
| WA-CT-300150-1.2 | 300 | 150 | 1.2 | 2000 |
| WA-CT-400100-1.5 | 400 | 100 | 1.5 | 2000 |
| WA-CT-400150-1.5 | 400 | 150 | 1.5 | 2000 |
| WA-CT-500100-1.5 | 500 | 100 | 1.5 | 2000 |
| WA-CT-500150-1.5 | 500 | 150 | 1.5 | 2000 |
| WA-CT-600100-2 | 600 | 100 | 2 | 2000 |
| WA-CT-600150-2 | 600 | 150 | 2 | 2000 |
| WA-CT-800100-2 | 800 | 100 | 2 | 2000 |
| WA-CT-800150-2 | 800 | 150 | 2 | 2000 |
| WA-CT-800200-2 | 800 | 200 | 2 | 2000 |
| WA-CT-1000100-2.5 | 1000 | 100 | 2.5 | 2000 |
| WA-CT-1000150-2.5 | 1000 | 150 | 2.5 | 2000 |
| WA-CT-1200100-2.5 | 1200 | 100 | 2.5 | 2000 |
| WA-CT-1200150-2.5 | 1200 | 150 | 2.5 | 2000 |
| WA-CT-1200200-2.5 | 1200 | 200 | 2.5 | 2000 |
Material: stainless steel SS304 or SS316, [confirm which grades and thicknesses you offer]. Standard length: [confirm, e.g. 2000 mm]. Surface: [confirm, e.g. pickled and passivated or brushed]. Cover: optional. Drainage holes: available on request. Custom widths, heights, thicknesses, lengths, and cover types are available on request.
Where to Use It
- Coastal and offshore sites exposed to salt air
- Chemical, petrochemical, and wastewater plants
- Food, beverage, and pharmaceutical facilities
- Wash-down areas and clean-process rooms
- Control and instrumentation cable routes in demanding environments
SS304 or SS316?
| SS304 | SS316 | |
|---|---|---|
| Corrosion resistance | Good for general indoor and many outdoor uses | Better, especially against chlorides and salt |
| Typical use | Food processing, commercial, general industry | Coastal, marine, chemical, and harsher process areas |
| Cost | Lower | Higher |
If you are not sure which grade your site needs, tell us the environment and we will advise.
Good to Know
- Use stainless steel hardware: carbon steel bolts and brackets can cause rust stains and corrosion where they touch stainless tray
- Keep the surface clean: iron particles from cutting or tools can cause surface rust spots, so use stainless-grade tools and clean cut areas after cutting
- Heat: a solid base gives less airflow than perforated tray, so check cable ratings and fill if the cables run warm
- Water: on damp routes, water can collect on a solid base, so ask us about drainage holes
Why Choose Wanan
Wanan has been manufacturing cable management products since 2004, with a 20,000 m² factory. We supply EPC contractors, MEP contractors, and distributors, with drawings, OEM/ODM service, and documents such as material certificates and inspection reports on request. Send us your environment, sizes, and quantity, and our team will quote.
Or email admin@wananelectric.com, or call or WhatsApp +86 18823394830.
