Our stainless steel perforated cable tray is made for routes where zinc-coated steel is not enough. Stainless steel resists corrosion through its own composition, not through a surface coating, so there is nothing to wear off, and cut edges and punched holes stay protected. The perforated base keeps cables ventilated and easy to fix, which makes this tray a dependable choice for coastal sites, chemical and food-processing plants, and other demanding environments.
Key Features
- Corrosion resistance through the material: no coating to chip or wear, so cut edges and hole walls stay protected
- Two grades: SS304 for general corrosion resistance, and SS316 where chlorides, salt spray, or harsher chemicals are present
- Hygienic and easy to clean: a smooth stainless surface suits food, beverage, pharmaceutical, and clean-process areas
- Strong across a wide temperature range: stainless steel keeps its strength better at high temperature than many other tray materials
- Ventilated, easy-access base: perforations let heat escape and let cable ties be fixed anywhere along the run
- Complete system: matching bends, risers, tees, reducers, covers, splice plates, and stainless steel hardware can be supplied
Specifications
| Size, Width x Height (mm) | Thickness (mm) |
|---|---|
| 50 x 50 | [confirm] |
| 100 x 50 | [confirm] |
| 100 x 100 | [confirm] |
| 150 x 100 | [confirm] |
| 200 x 100 | [confirm] |
| 200 x 150 | [confirm] |
| 300 x 100 | [confirm] |
| 300 x 150 | [confirm] |
| 400 x 100 | [confirm] |
| 400 x 150 | [confirm] |
| 500 x 100 | [confirm] |
| 500 x 150 | [confirm] |
| 600 x 100 | [confirm] |
| 600 x 150 | [confirm] |
| 800 x 100 | [confirm] |
| 800 x 150 | [confirm] |
| 800 x 200 | [confirm] |
| 1000 x 100 | [confirm] |
| 1000 x 150 | [confirm] |
| 1200 x 100 | [confirm] |
| 1200 x 150 | [confirm] |
| 1200 x 200 | [confirm] |
Material: stainless steel SS304 or SS316, [confirm which grades and thicknesses you offer]. Standard length: [confirm, e.g. 2000 mm]. Surface: [confirm, e.g. pickled and passivated or brushed]. Custom widths, heights, thicknesses, lengths, and hole patterns are available on request.
Where to Use It
- Coastal and offshore sites exposed to salt air
- Chemical, petrochemical, and wastewater plants
- Food, beverage, and pharmaceutical facilities
- Tunnels and areas with frequent washdown
- Oil and gas and other process industries
SS304 or SS316?
| SS304 | SS316 | |
|---|---|---|
| Corrosion resistance | Good for general indoor and many outdoor uses | Better, especially against chlorides and salt |
| Typical use | Food processing, commercial, general industry | Coastal, marine, chemical, and harsher process areas |
| Cost | Lower | Higher |
If you are not sure which grade your site needs, tell us the environment and we will advise.
Good to Know
- Use stainless steel hardware: carbon steel bolts and brackets can cause rust stains and corrosion where they touch stainless tray, so match the hardware to the tray
- Keep the surface clean: iron particles from cutting or tools can cause surface rust spots, so use stainless-grade tools and clean cut areas after cutting
- Grounding: stainless steel is electrically conductive, but bonded joints and connections should still be checked and tested after installation
Why Choose Wanan
Wanan has been manufacturing cable management products since 2004, with a 20,000 m² factory. We supply EPC contractors, MEP contractors, and distributors, with drawings, OEM/ODM service, and documents such as material certificates and inspection reports on request. Send us your environment, sizes, and quantity, and our team will quote.
