Our cable tray hanger is a U-shaped steel cradle that holds a cable tray from above. The tray sits in the base of the cradle, the sides rise and angle inward, and two punched ears at the top are used to fix the hanger to a threaded rod, strut, or other overhead support [confirm how the ears are fixed]. It lets you hang a tray from a ceiling, beam, or steel structure without a long bracket arm, and it keeps the tray held on both sides. Hangers are made to match the tray width and depth and come in pre-galvanized, hot-dip galvanized, stainless steel, and other finishes.
Or email abby@wananelectric.com, or call or WhatsApp +86 18823394830.
Key Features
- Cradle shape: the base carries the tray and the side walls keep it from moving sideways
- Overhead mounting: two punched ears at the top for fixing to a rod, strut, or support [confirm hole size]
- Made for the tray: sized to the tray width and side-rail height, so the tray sits snugly
- Simple and fast: one formed piece, with no extra brackets to assemble [confirm whether it is one piece or welded]
- Several finishes: pre-galvanized, hot-dip galvanized, stainless steel, or aluminum alloy [confirm the materials you supply]
- Customizable: width, depth, thickness, and hole size made to your drawings
Specifications
| Item | Details |
|---|---|
| Suits tray width | [confirm range, mm] |
| Inside depth | [confirm, mm] |
| Hanger height | [confirm, mm] |
| Thickness | [confirm, mm] |
| Ear hole size | [confirm, mm] |
| Material and finish | [confirm: pre-galvanized, hot-dip galvanized, stainless steel, aluminum] |
| Load per hanger | [confirm only if tested, otherwise per project specification] |
Where to Use It
- Ceiling-hung tray routes in buildings, plants, and workshops
- Trays hung from steel beams or roof structures
- Tunnels and utility corridors, where trays hang from above
- Routes where a wall bracket or floor frame is not possible
Choosing the Material
| Material | Best for | Points to note |
|---|---|---|
| Pre-galvanized steel | Indoor, dry routes | Cut edges and holes have no zinc, so avoid damp areas |
| Hot-dip galvanized steel | Outdoor, humid, and industrial routes | Thicker zinc coating, longer service life |
| Stainless steel (304 / 316) | Corrosive, coastal, and food or chemical areas | 316 resists chlorides better than 304. Higher cost |
| Aluminum alloy | Light trays, corrosive areas | Lighter but less stiff. Use stainless hardware to avoid galvanic corrosion |
Good to Know
- Match the hanger to the tray: width, side-rail height, and the cable load decide the hanger size and spacing
- Check the support: the rod, strut, and anchor must carry the load too, not only the hanger
- Spacing: hanger spacing follows the tray load and your project specification
- Match the finish: use rods, nuts, and washers of the same or a compatible material to avoid corrosion at the contact
- Bonding: a coated hanger does not conduct through the coating, so make bonding connections to bare metal, as your specification requires
Why Choose Wanan
Wanan has been manufacturing cable management products since 2004, with a 20,000 m² factory. We supply EPC contractors, MEP contractors, and distributors, with drawings, OEM/ODM service, and documents such as material certificates and inspection reports on request. Send us your tray width, quantity, and finish, and our team will quote hangers with the tray.
Or email abby@wananelectric.com, or call or WhatsApp +86 18823394830.
