Our galvanized solid bottom cable tray has a continuous, unperforated base and two solid side rails, protected by a zinc coating. The solid base supports cables along their full length and keeps dust, debris, and small objects out, while the zinc coating protects the steel from corrosion. It is a practical choice for control, instrumentation, and data cables, and for routes that need more protection than perforated or ladder tray can give. Choose pre-galvanized finish for dry indoor routes, or hot-dip galvanized finish for outdoor, humid, and industrial areas.
Key Features
- Full cable support: the continuous base carries small and soft cables along their entire length, with no sagging between rungs or holes
- Better protection: solid sides and base keep dust, debris, and small objects out, and stop cables from falling through
- Zinc corrosion protection: the galvanized finish protects the steel, with no repainting needed during normal service life
- Conductive surface: zinc is conductive, so galvanized tray joints generally make electrical continuity easier than painted tray
- Optional cover: a matching galvanized cover closes the run for extra protection
- Complete system: matching bends, tees, reducers, covers, and supports can be supplied with the same finish
Pre-Galvanized or Hot-Dip Galvanized?
| Pre-Galvanized | Hot-Dip Galvanized | |
|---|---|---|
| Best for | Dry, clean indoor routes | Outdoor, humid, and industrial routes |
| Cut edges | Not coated | Coated |
| Coating | Thinner, smooth surface | Thicker, covers every surface |
| Cost | Lower | Higher |
Specifications
| Model | Width (mm) | Height (mm) | Thickness (mm) | Length (mm) |
|---|---|---|---|---|
| WA-CT-5050-1 | 50 | 50 | 1 | 2000 |
| WA-CT-10050-1 | 100 | 50 | 1 | 2000 |
| WA-CT-100100-1 | 100 | 100 | 1 | 2000 |
| WA-CT-150100-1 | 150 | 100 | 1 | 2000 |
| WA-CT-200100-1.2 | 200 | 100 | 1.2 | 2000 |
| WA-CT-200150-1.2 | 200 | 150 | 1.2 | 2000 |
| WA-CT-300100-1.2 | 300 | 100 | 1.2 | 2000 |
| WA-CT-300150-1.2 | 300 | 150 | 1.2 | 2000 |
| WA-CT-400100-1.5 | 400 | 100 | 1.5 | 2000 |
| WA-CT-400150-1.5 | 400 | 150 | 1.5 | 2000 |
| WA-CT-500100-1.5 | 500 | 100 | 1.5 | 2000 |
| WA-CT-500150-1.5 | 500 | 150 | 1.5 | 2000 |
| WA-CT-600100-2 | 600 | 100 | 2 | 2000 |
| WA-CT-600150-2 | 600 | 150 | 2 | 2000 |
| WA-CT-800100-2 | 800 | 100 | 2 | 2000 |
| WA-CT-800150-2 | 800 | 150 | 2 | 2000 |
| WA-CT-800200-2 | 800 | 200 | 2 | 2000 |
| WA-CT-1000100-2.5 | 1000 | 100 | 2.5 | 2000 |
| WA-CT-1000150-2.5 | 1000 | 150 | 2.5 | 2000 |
| WA-CT-1200100-2.5 | 1200 | 100 | 2.5 | 2000 |
| WA-CT-1200150-2.5 | 1200 | 150 | 2.5 | 2000 |
| WA-CT-1200200-2.5 | 1200 | 200 | 2.5 |
Material: galvanized steel, [confirm: pre-galvanized, hot-dip galvanized, or both]. Standard length: [confirm, e.g. 2000 mm]. Cover: optional. Custom widths, heights, thicknesses, lengths, and cover types are available on request.
Where to Use It
- Control and instrumentation cable routes
- Dusty areas, workshops, and industrial plants
- Electrical rooms and data cable routes that need protection
- Routes where small cables must be supported along their full length
Good to Know
- Heat: a solid base gives less airflow than perforated tray, so check cable ratings and fill if the cables run warm
- Water: in outdoor or damp routes, water can collect on a solid base, so ask us about drainage holes if needed
- Fixing cables: cables are fixed with clamps or ties to the tray, since there are no perforations to tie through
- Cut edges: treat field-cut ends with a suitable zinc-rich touch-up product, following the manufacturer's instructions
Why Choose Wanan
Wanan has been manufacturing cable management products since 2004, with a 20,000 m² factory. We supply EPC contractors, MEP contractors, and distributors, with drawings, OEM/ODM service, and documents such as inspection reports on request. Send us your cable load, support spacing, and environment, and our team will recommend a size and quote.
