Our galvanized quick straight coupling joins two lengths of electrical conduit end to end, quickly and without threading. The conduit is pushed into the coupling and secured, so a run can be assembled fast with simple tools. It is made from zinc-coated steel to match galvanized conduit, and it suits concealed and exposed routes in walls, ceilings, and surface-mounted runs in dry indoor locations.
Or email admin@wananelectric.com, or call or WhatsApp +86 18823394830.
Key Features
- Quick to install: the conduit pushes in and is secured, with no threading and no special equipment
- Straight, firm joint: keeps two conduit lengths in line and mechanically connected
- Zinc-coated steel: the galvanized finish matches the conduit and protects the steel from rust in normal indoor conditions
- Smooth inside: a clean bore at the joint helps cables pull through without snagging
- Matched to the conduit: made to fit the outer diameter of our galvanized conduit
- Part of a full system: connectors, elbows, tees, and boxes are available to complete the run
Specifications
| No. | Product | Size | Wall Thickness (mm) | Length | Standard |
|---|---|---|---|---|---|
| 1 | Galvanized Conduit | JDG20 | 1.2 | 4 m / pc | Non-GB |
| 2 | Galvanized Conduit | JDG20 | 1.5 | 4 m / pc | Non-GB |
| 3 | Galvanized Conduit | JDG20 | 1.6 | 4 m / pc | GB standard |
| 4 | Galvanized Conduit | JDG25 | 1.2 | 4 m / pc | Non-GB |
| 5 | Galvanized Conduit | JDG25 | 1.5 | 4 m / pc | Non-GB |
| 6 | Galvanized Conduit | JDG25 | 1.6 | 4 m / pc | GB standard |
| 7 | Galvanized Conduit | JDG32 | 1.2 | 4 m / pc | Non-GB |
| 8 | Galvanized Conduit | JDG32 | 1.5 | 4 m / pc | Non-GB |
| 9 | Galvanized Conduit | JDG32 | 1.6 | 4 m / pc | GB standard |
| 10 | Galvanized Conduit | JDG40 | 1.2 | 4 m / pc | Non-GB |
| 11 | Galvanized Conduit | JDG40 | 1.5 | 4 m / pc | Non-GB |
| 12 | Galvanized Conduit | JDG40 | 1.6 | 4 m / pc | GB standard |
| 13 | Galvanized Conduit | JDG50 | 1.2 | 4 m / pc | Non-GB |
| 14 | Galvanized Conduit | JDG50 | 1.5 | 4 m / pc | Non-GB |
| 15 | Galvanized Conduit | JDG50 | 1.6 | 4 m / pc | GB standard |
| 16 | Galvanized Conduit | JDG63 | 1.6 | 4 m / pc | GB standard |
| 17 | Galvanized Conduit | JDG63 | 1.9 | 4 m / pc | GB standard |
Standard length is 4 meters per piece. "GB standard" means the Chinese national standard wall thickness. Other sizes and wall thicknesses are available on request.
Material: zinc-coated steel, [confirm process: electro-galvanized or other]. Securing method: [confirm: set-screw (for JDG) or snap-press (for KBG)]. Other sizes are available on request.
Where to Use It
- Concealed conduit in walls, ceilings, and floors
- Exposed surface-mounted conduit in offices, shops, and commercial buildings
- Factories, workshops, and equipment rooms with dry conditions
- Residential and public building wiring
Good to Know
- Match the system: a coupling must suit the conduit type and size. Set-screw couplings go with JDG conduit, and snap-press couplings go with KBG conduit
- Dry locations: this fitting is for dry indoor routes. It does not seal against water by itself, so use sealed fittings for outdoor or damp routes
- Seat the conduit fully: push each conduit end in until it stops, then secure it as the manufacturer instructs
- Keep the bore clear: deburr the conduit ends before insertion so cables are not damaged
- Continuity: a firmly secured fitting helps keep the conduit electrically continuous. Check it according to your project specification
Why Choose Wanan
Wanan has been manufacturing electrical conduit and cable management products since 2004, with a 20,000 m² factory. We supply EPC contractors, MEP contractors, and distributors, with drawings, OEM/ODM service, and documents such as material certificates and inspection reports on request. Send us your conduit type, sizes, and quantity, and our team will quote conduit and fittings together.
Or email admin@wananelectric.com, or call or WhatsApp +86 18823394830.
