Our galvanized conduit bushing fits on the end of a conduit where it enters a box or enclosure, with a smooth rounded opening that protects cables from the sharp edge of the pipe. When cables are pulled through, or vibrate in service, a bare conduit end can cut into the insulation. The bushing covers that edge and guides the cable safely out. It is made from zinc-coated steel to match galvanized conduit, and it is a small, low-cost part that adds real protection to every conduit run.
Or email admin@wananelectric.com, or call or WhatsApp +86 18823394830.
Key Features
- Protects the cable: a smooth, rounded edge replaces the sharp cut end of the conduit
- Easy to fit: fits on the conduit end quickly, with simple tools
- Zinc-coated steel: the galvanized finish matches the conduit and protects the steel from rust in normal indoor conditions
- Guides cables in: a flared opening helps cables enter and leave without snagging
- Sizes to match the conduit: made to fit our galvanized conduit sizes
- Part of a full system: works with our conduit, connectors, couplings, and boxes
Specifications
| Conduit Size | Fit | Overall Length (mm) | Opening (mm) |
|---|---|---|---|
| 20 | [confirm] | [confirm] | [confirm] |
| 25 | [confirm] | [confirm] | [confirm] |
| 32 | [confirm] | [confirm] | [confirm] |
| 40 | [confirm] | [confirm] | [confirm] |
| 50 | [confirm] | [confirm] | [confirm] |
| 63 | [confirm] | [confirm] | [confirm] |
Material: zinc-coated steel, [confirm process: electro-galvanized or other]. How it fits: [confirm: threaded onto a male thread, pushed or crimped onto the conduit, or other]. Thread standard if threaded: [confirm: metric, NPT, BSP, or other]. Other sizes are available on request.
Where to Use It
- Conduit ends entering junction boxes, switch boxes, and enclosures
- Conduit ends entering distribution boards and panels
- Open conduit ends where cables leave the pipe
- Offices, shops, and commercial buildings
- Factories, workshops, and equipment rooms with dry conditions
Good to Know
- Match the size and fit: choose the bushing that suits the conduit size and the way it fits on, whether threaded or pushed on
- Deburr first: a bushing helps, but the conduit end should still be cut square and deburred before fitting
- Use where cables enter or leave: fit one at each exposed conduit end, so cables never rest on a sharp edge
- Not a seal: a bushing protects cables but does not seal against water or dust, so use sealed fittings where the route needs it
- Follow the specification: where bushings are required comes from your project specification and the applicable electrical code
Why Choose Wanan
Wanan has been manufacturing electrical conduit and cable management products since 2004, with a 20,000 m² factory. We supply EPC contractors, MEP contractors, and distributors, with drawings, OEM/ODM service, and documents such as material certificates and inspection reports on request. Send us your conduit sizes and quantity, and our team will quote bushings, conduit, and fittings together.
Or email admin@wananelectric.com, or call or WhatsApp +86 18823394830.
