Our adjustable cable tray support bracket lets the height, angle, or reach of a tray support be set on site, instead of being fixed at the factory. It is used where the tray route does not line up with a standard fixed bracket, such as at changes of level, sloped surfaces, uneven walls, or where site dimensions differ from the drawings. Slots, sliding parts, or a telescopic arm let the installer fine-tune the position, then lock it in place. This saves time and cuts the need for custom brackets and rework.
Or email admin@wananelectric.com, or call or WhatsApp +86 18823394830.
Key Features
- Adjustable on site: [confirm what adjusts: height, arm length, angle, or width] can be set and locked during installation
- Fits uneven conditions: copes with differences between drawings and site, and with sloped or uneven surfaces
- Fewer special parts: one adjustable bracket can cover several sizes, which reduces stock and custom orders
- Quick to install: position, then tighten, with common tools
- Strong lock: bolted or clamped connection keeps the setting under load [confirm how it locks]
- Several materials: pre-galvanized steel, hot-dip galvanized steel, stainless steel, aluminum alloy, and other finishes [confirm the materials you supply]
- Fits our tray: works with ladder, perforated, and trough tray
- Customizable: adjustment range, thickness, hole layout, and finish made to your drawings
Specifications
| Item | Details |
|---|---|
| Adjustment type | [confirm: height, arm length, angle, or combined] |
| Adjustment range | [confirm, mm or degrees] |
| Suits tray width | [confirm range, mm] |
| Thickness | [confirm, mm] |
| Material and finish | [confirm: pre-galvanized, hot-dip galvanized, stainless steel, aluminum] |
| Safe working load | [confirm, at the adjustment positions it applies to] |
| Fixing | [confirm: anchor bolts, channel nut, or weld-on] |
Where to Use It
- Tunnels, plant rooms, and utility corridors
- Routes with changes of level or slope
- Retrofit and renovation work, where site dimensions differ from the drawings
- Large projects with many tray sizes
- Any support point that must be fine-tuned on site
Adjustable or Fixed Bracket?
| Adjustable bracket | Fixed bracket | |
|---|---|---|
| Fit to site | Set on site | Set at the factory |
| Sizes covered | Several with one part | One per size |
| Strength per size | Depends on the lock, usually slightly lower | Highest, one solid piece |
| Installation | Adjust, then tighten | Fix and go |
| Cost | Usually higher per piece | Usually lower per piece |
| Best for | Uneven or changing conditions | Repeated, known conditions |
Good to Know
- Tighten fully: the load rating applies only when the adjustment is locked as the manufacturer instructs, so tighten to the specified torque
- Check the load at the setting: the safe load can change with the arm length or height you set, so use the load data for that position
- Check the wall: the wall or upright must carry the load, and the anchor must suit the wall material
- Space as designed: support spacing along the run comes from your project design and the tray load data
- Match the material: use brackets and hardware suited to the tray and the environment, to avoid corrosion at the contact
- Bonding: brackets and tray joints should be bonded to the earthing system, tested according to your project specification
Why Choose Wanan
Wanan has been manufacturing cable management products since 2004, with a 20,000 m² factory. We supply EPC contractors, MEP contractors, and distributors, with drawings, OEM/ODM service, and documents such as material certificates and inspection reports on request. Send us your tray size, site conditions, and quantity, and our team will quote brackets and tray together.
Or email admin@wananelectric.com, or call or WhatsApp +86 18823394830.
